MERT KOMPRESÖR

Technical Service.

We provide maintenance, repair and technical service for every make of compressor across all provinces of Türkiye, backed by over twenty-five years of experience.

What We Offer

With You Long
After the Sale.

build

On-Site Technical Service

On-site response for faulty compressors. Maintenance, repair and commissioning for every make of screw and piston machine.

swap_horiz

Used Machine Purchase and Trade-In

We buy your used compressor at its real value and offer a trade-in against a new or fully serviced, warranted used machine.

event_repeat

Scheduled Maintenance Agreement

An annual agreement ensures every check and service happens on time, lowering both failure risk and maintenance cost.

water_drop

Air Dryers and Filters

Repair, maintenance and trade-in for air dryers. Sales of dedicated water-separating line filters.

plumbing

Pipework and Engineering

Compressor room layout, air line installation and complete compressed air pipework.

verified

Air Receivers and Test Reports

Compressed air receiver sales and preparation of receiver test reports stamped by the Chamber of Mechanical Engineers.

speed

Variable Speed Systems

Supply of variable-speed (inverter) compressors on request, saving energy under fluctuating demand.

settings

Genuine Spare Parts

Supply and sale of genuine spare parts for screw and piston compressors, shipped quickly from stock.

Workshop Process

From Strip-Down
to Commissioning.

Our main workshop is equipped with the specialist tooling needed to establish exactly why a compressor block failed, judge whether a repair is cost-effective, and carry out that repair at the right time and in the right place.

Our inspection programme includes stripping the compressor down to its cast body. Cleaning and dismantling by specialists makes it possible to assess the most cost-effective course of action in each case.

Our qualified engineers follow the compressor from the moment it arrives at the workshop until remanufacture is complete, with quality checks at every stage.

On-Site Service

In larger industrial systems, removing and transporting a compressor is impractical and downtime is costly. With on-site engineering support the compressor is dismantled, inspected and its faulty parts replaced; after repair the operating parameters are checked and the system is recommissioned.

81
Provinces Served
7/24
Support
25+
Years Experience
Maintenance Schedule

Extend Your
Compressor's Life.

Carried out regularly, the checks below prevent the great majority of failures and lower maintenance costs. Under a scheduled maintenance agreement we take these on for you.

Daily

  • check_small Check the oil level in the tank before starting; top up if low.
  • check_small After a normal start, confirm the front panel gauges all read within range.

Weekly

  • check_small Check the oil level.
  • check_small Drain water collected in the oil reservoir.
  • check_small Clean the radiator matrix with compressed air.
  • check_small Clean the dust filter and the intake filter.
  • check_small Inspect internal components.

First 800 hours

  • check_small Grease the electric motor bearings (refer to the motor bearing lubrication chart).

Every 1,000 hours

  • check_small Check the control air circuit hoses; replace if needed.
  • check_small Check the contactor contacts; replace if needed.
  • check_small Replace the dust filter.
  • check_small Clean the radiator matrix with non-flammable cleaners.
  • check_small Check the separator differential; replace the element if blocked.
  • check_small Clean the intake and air filters; replace if needed.

Every 2,000 hours

  • check_small Change the oil and oil filter.
  • check_small Check all oil circuit fittings.
  • check_small Check all electrical power circuit connections.
  • check_small Check belt tension; re-tension if it vibrates excessively in operation.

Every 4,000 hours

  • check_small Replace the oil plug O-ring.
  • check_small Replace the separator.
  • check_small Check all bolted connections.
Service Coverage

Compressor Service in
All 81 Provinces.

We provide maintenance and repair throughout Türkiye, Istanbul first and foremost. Contact us to arrange service planning for your province.

call +90 535 560 00 63
Get in Touch

A Fast Quote
for Your Project.

Let's work out the compressed air solution that fits your needs. Our specialists will come back to you shortly with a tailored quote.

call+90 535 560 00 63 mailinfo@mertkompresor.com
location_onİkitelli, Başakşehir / İstanbul
call